>>> Acceptance and Precautions for Second-hand House Disassembly and Assembly
Buying a second-hand house is also a matter of housing, and you must check it out before you buy it:
1. The accurate area of ​​second-hand housing includes the building area, the use area and the actual area of ​​the house. It is necessary to confirm carefully. It is better to measure the area inside the house on the spot and find out whether the house type is reasonable;
2, open the tap to observe the water quality, water pressure; confirm the power supply capacity; observe indoor and outdoor wire aging, telephone lines, gas is connected;
3, to understand the age of the house, land use period and the general situation of the previous tenants;
4, also to understand the surrounding facilities and environment, inquire about the water, electricity, coal, heating, property management fees charging methods;
5. When accepting second-hand housing with decoration, you need to pay attention to:
1 floor tile, use a small hammer to make a sound, indicating no solid
2 floor paving, pay attention to the corner and the surrounding, see if there is loose
3 The balcony, toilet near the floor should pay attention to whether there is no cracking or moldy
4 Check from the side whether the wall surface is smooth and clean, if there is pungent odor, and if there is a gap between the wall and the baseboard, the baseboard and the floor
5 See if there is any scale around the toilet pipe and determine if the pipe leaks through the water
6 When testing the bathtub, first open the faucet to see if the flow is smooth, and then put the water to see if the drainage system is normal.
7 Turn on the TV and check the cable reception
8 also need to understand hidden project conditions, such as water pipes, wires, etc.
Second-hand housing TV decoration faucet housing unit decoration floor tiles bathroom floor tiles