Good Quality Plastic Raw Materials PVC Resin K67/K57/K70 for Selling

Moisture Content: Less Than 0.15%
Granule Diameter: 2.5mm
Particle Size: Less Than 48 Micrometre
Density: 1.5-2.0g/ Cubic Centimeter
Mfi (G/10min): Less Than 48 Micrometre
Weather/Light/Color Fastness: Level 7 to 8
Color Migration Resistance: Barely Dissolve out
Standard: RoHS, ISO9001
Add Ratio: 4%~10%
Trademark: Longyuan
Transport Package: 25kg/Bag Water-Proof Plastic Paper Bag
Specification: Diameter 2.5mm
Origin: Mainland, China
HS Code: 3204199000

Product Description


Commodity:PVC resin
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form. 
They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
 
Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.

Good Quality Plastic Raw Materials PVC Resin K67/K57/K70 for Selling



Good Quality Plastic Raw Materials PVC Resin K67/K57/K70 for Selling
Tape:    SG1  SG2  SG3  SG4  SG5  SG6  SG7  SG8
K value  77-75 74-73 72-71 70-69 68-66 65-63 62-60 59-55
Viscosity, ml/g  156-144 143-136 135-127 126-119 118-107 106-96 95-87 86-73
Average polymerization     1350-1250 1250-1150 1100-1000 950-850 950-850 750-650
Number of impurity particle≤  30  30  30  30  30  30  40  40
Volatiles content %,≤  0.40  0.40  0.40  0.40  0.40  0.40  0.40  0.40
Appearing density g/ml≥  0.42  0.42  0.42  0.42  0.42  0.45  0.45  0.45
Residual  after sieve     0.25mm mesh≤  2.0  2.0  2.0  2.0  2.0  2.0  2.0  2.0
       0.063mm l≥   90  90  90  90  90  90  90  90
Number of
grain/400cm2≤
 40  40  40  40  40  40  40  40
Plasticizer absorbency value of 100g resin  25  25  25  22  19  16  14  14
Whiteness %,≥  74  74  74  74  74  74  70  70
Residual chlore thylene content mg/kg≤  5  5  5  5  5  5  5  5
 Ethylidene chloride mg/kg≤  150  150  150  150  150  150  150  150

Good Quality Plastic Raw Materials PVC Resin K67/K57/K70 for Selling


Why choose us?
A broad standard color range available from the stock as well as tailor made products develop according to customer requirement.
We like to develop a long term business relationship with you.
Our packing bags can be used again and again 10 times to basically be scrapped, and our can be used repeatedly 20 times.
Our masterbatch uses environmental protection technology, save the environmental protection expense.
Our masterbatch is safer to use, and ensure worker safety.
We can provide a complete set of data analysis.
We can provide a large number of mechanical operation images to ensure the quality of production.
We have advanced production technology, constant innovation.
We promise that our product has passed through rigorous test, the quality can be guaranteed and reliable.
We have modern production and testing equipment.
We have high quality raw material, advanced facilities, fine procedures.


Good Quality Plastic Raw Materials PVC Resin K67/K57/K70 for Selling



FAQ

Does the buyer have other ways to get the needed color?
Yes, you can just inform us the general international color number (eg. Pantone). We will produce the sample according to the color number.
How does the seller make sure what they provide is exactly what the buyer needs?
We will make sample first and confirm with the buyer. After confirm the sample with the buyer, we will produce the formal order.
Could I get a sample for free?
Yes, you can get the sample for free, but should bear the delivery fee.
What should the buyer do before using the masterbatch?
You should confirm the percentage of appending proportion. For example, if using for film blowing with PE material, the required percentage is 4%.
What's the normal proportion?
The normal proportion is 2% - 4%. But it is not fixed. It depends on the buyer's requirement.

Contact Us Inquiry:
Tel: + 86 15230830976
Fax: + 86-574-63883608

 




 

Premium HSS-PM Drills

PREMIUM HSS-PM DRILLS

used for stainless steel, iron sheet, angle steel, copper and aluminum, etc. It is also suitable for wood, plastic and other software materials.

FEATURE:

OPT premium HSS-PM drills are used to machining for cast iron, non-ferrous Features you should know

1.Designed to machine tool steel,alloy steel,mold steel,and other high hardened materials;

2.Suitable for aluminum,aluminum alloy,copper&non-ferrous materials;

3.Designed for HRC45-55 and HRC60;

4.Altin coating for high wear resistance;

5.High quality with reasonable price;

6.Rapid delivery;

7.Altin/sin/dlc coating and customized coating;



Flexible in order quantity:

Samples can be provided before mass production, and MOQ can be discussed accordingly.


PRODUCT DETAIL:

Premium Hss Pm DrillsPremium Hss Pm Drills2Premium Hss Pm Drills4Premium Hss Pm Drills3Premium Hss Pm Drills6


PRODUCTING PROGRESS:

4product detail-fanyi

PAYMENT AND DELIVERY:

banggong huang jing

PRODUCT EQUIPMENT :

product equipment

ABOUT US :

We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,


We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

banggong huang jing

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

great service


High Speed Steel Bit,HSS Drill Bits,High Speed Drill Bits,Carbide HSS PM Drill

OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.net