Recently, some consumers told the editor about their stubborn shopping experience. He suspected that the solid wood furniture that started peeling just four months after moving to the house was a counterfeit product, and the product quality was poor. Experts said that solid wood veneer furniture can only be called solid wood furniture , but not solid wood furniture. If consumers have doubts, it is best to go to an authoritative organization for identification to protect their rights.
Reader encounter
"Solid wood furniture" peeled off
Recently, some consumers reported to reporters that the " solid wood furniture " they bought for tens of thousands of yuan had only been used for four months. Not only were there many cracks, but also the wood grain on the outside of the furniture was warped, and the inside Substrate. The consumer believes that the furniture he bought is not only of poor quality, but also involves counterfeit and shoddy products. "How can the solid wood furniture be lifted up? This must be a piece of artificial wood furniture with fake wood skin attached!"
Solid wood veneer is not the same as solid wood furniture
However, the after-sales of the furniture did not claim that its own furniture was not solid wood furniture, but only repaired the damaged furniture for consumers. Seeing that the furniture can still be used, consumers are prepared to stop pursuing it under the persuasion of their families, but there is still a question in my heart, "Should solid wood furniture be like this? Am I deceived?"
Expert explanation
Veneers are only solid wood furniture
With questions from consumers, the reporter interviewed experts and industry insiders. Luo Xin, executive deputy director of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, pointed out that consumers should first clarify the concept of solid wood furniture.
According to national standards, solid wood furniture is divided into three categories: solid wood veneer furniture [the base material is made of solid wood sawn wood or solid wood plate, and the surface is covered with solid wood veneer or veneer (wood veneer) furniture], solid wood furniture (base material Furniture made of solid wood sawn timber or solid wood board, without surface treatment on the surface) and all solid wood furniture (except all wooden parts, except for mirror pallets, beading) are furniture made of solid wood sawn timber or solid wood sheet.
According to the description of consumers, Luo Xin believes that it should buy solid wood veneer furniture, which can only be regarded as solid wood furniture and not equivalent to solid wood furniture. Merchants sell solid wood veneer furniture as solid wood furniture, which is inherently problematic. He also reminded that when purchasing solid wood furniture and signing a contract, it must be filled in under the correct name, and the above three categories should be clearly marked.
Regarding the phenomenon that the exterior veneer of the furniture is separated from the substrate, Luo Xin believes that this is a manifestation of unqualified products. Experts in the furniture industry also said that this is too poor veneer technology. The cracking of ordinary solid wood furniture may be related to the use environment, but this phenomenon is entirely because the quality is not close, but the peeling can be repaired.
Distinguish between true and false
Can be judged with the naked eye
The reason why the consumer thinks that the furniture purchased by his home is "skinned skin" has always been that only a layer of leather is decorated on the board furniture , and the finish on other furniture should be lacquer. Industry experts pointed out that this is a misunderstanding of consumers and cannot be used to judge the authenticity of furniture purchases.
First of all, in terms of material, the surface of the solid wood veneer furniture is covered with a layer of solid wood veneer or veneer. Since the veneer has warped up, consumers can distinguish the material from the side. The panel furniture finish is a layer of paper. Due to technological advancement, the wood grain of the veneer on the panel furniture can also be faked, which is difficult to see from the surface.
Second, the finish of panel furniture will not be separated from the substrate. Even if the blisters swell, they will cling to the substrate. For solid wood veneer furniture, if the veneer is detached, most of them will form a bubble shape. You can feel the cavity formed by flicking with your hands.
Is it possible to stick solid wood veneer or veneer on the artificial board as solid wood veneer furniture? Experts say it does exist, but it has been very few in recent years. Consumers should judge the material of the furniture. In addition to supervising the merchant to mark the furniture category on the contract, they should also observe the material under the skin.
"Consumers in the case can already see the base material under the skin, which is a good judgment." Experts said, but whether solid wood furniture uses solid wood sawn wood or solid wood plate, most of them can see the wood pipe holes, Annual rings, fibers, etc. If the base material does not have these characteristics, then it is indeed suspected that the furniture is doped with particleboard and density board.
"The chipboard can see small pieces of wood, while the density board is generally brownish black or slightly white. It looks very uniform and thick, and the fibers are not visible." Of course, if you really want to protect rights, experts remind you If there is any objection, it is better to go to a professional institution for testing to determine.
Our factory specializes in producing plastic cake shovel, Stainless Steel cake shovel, slicone spatula,Baking Spatula, Metal Spatula and other series of stainless steel plastic products enterprises. Our stailess steel spatula is made of food grade material . We have different kinds of handles like rubber handles spatula andplastic handle spatula. We have accumulated more than ten years of R & D and production experience in the production of cake shovel products. Strict control of product quality, standardized management of operations for the production of high-quality products to provide the most reliable guarantee. Full introduction of current high-efficiency automated production equipment. In terms of quality and output, the quality of each product in the production process of each process through strict quality inspection, improve the reliability of product quality. We continue to innovate, but not stop to improve the service quality of our products. As always, we continue to innovate to meet the changing market and customer's different needs.
Silicone Spatula,Baking Spatula,Metal Spatula,Stainless Steel Spatula
YangJiang Victory Kitchenware Products Co.,LTD. , https://www.victory-kitchenware.com