Nowadays, people's pursuit of quality of life is getting higher and higher. To create a comfortable shower, the installation of details requires extra care. The installation, layout, etc. of small objects require a certain degree of expansion. Today, Xiaobian introduces the correct installation skills for high shower faucets, and the hot and cold water outlets are the central hub!
1. The hot water outlet of the wall of the high shower faucet should be installed. The height of the two inner wire joints should be the same, so that the main body and the shower rod will not be skewed.
2. Where the high shower faucet is installed on the wall of the hot and cold water outlet, the two inner wire interfaces should be in accordance with the angle, so that there is no hidden danger such as poor installation and water leakage.
3. The wall of the high shower faucet is installed with hot and cold water outlets. The wall surface after the tile is laid is flush with the two inner wires. It is not suitable for over-indentation or bulging, so the installation will be smoother.
4. The installation of the internal waterway and circuit position of the high shower faucet should be clearly marked on the wall so that the pipeline will not be drilled when drilling.
5. Installation of high shower faucets should not be hollow and avoid rupture of tiles when drilling.
As for the choice of high shower faucets, there are single water, double water, and three water. This depends on personal hobbies, each with its own conveniences and advantages. If you are planning to install a high shower faucet, please pay attention to the installation details of the high shower faucet mentioned above, which will not only save the trouble of decoration, but also give you a good shower enjoyment.
Concerned about surprises
Label: high shower faucet installation analysis hot and cold water hub as the center
Previous: How to remove the paint smell from the decoration of the little one Next: Consumers have to buy four traps to buy furniture have to prevent!
3 Phase Rebar Cutting Machine, this machine should be 3phase 380V/220V/440V. The motor should be confirmed as customer's local requirement.
Rebar Cutting Machine also can apply single phase as customer's requirement.
3phase rebar cutting machine can be applied to cut the normal common carbon steel rod, hot rolled steel, deformed steel, flat steel, square steel, and angle steel in machine processing and construction projects.
3 Phase Rebar Cutting Machine
Rebar Cutting Machine,Electric Rebar Iron Cutting Machine,Circular Saw Rebar Cutting Machine,Cheap Rebar Cutting Machines
BAODING JINDI MACHINERY CO., LTD , https://www.rebarconnector.com