We know that each type of kitchen will be different, so many families now choose to use custom cabinets, which will make the layout of the kitchen more suitable. However, there are some related problems when customizing the wardrobe. We need to pay attention to it. Otherwise, we will suffer when we customize. What are the attentions? Let's look at it together.
1. Ask if you are a separate cabinet
Our consumers can identify them by packing and installing the cabinets. If the single cabinets are assembled in separate cabinets, each cabinet should have a separate package; in fact, consumers can also observe them in front of the cabinet.
2, to ask the thickness of the cabinet board
In the current market, there are 16 mm, 18 mm and other thickness gauges, the thickness of which varies greatly, and the cost of this 18 mm thick is 16% higher than that of the 16 mm thick. The service life of the cabinet made of 18 mm thick plate can be more than doubled to ensure that the door panel is not deformed and the table top is not cracked. When we look at the samples, our consumers must carefully understand the composition of the materials and be aware of them.
3, to ask whether the back panel is single-sided or double-sided
In fact, in order to save costs, some manufacturers cut corners and cut only the single-sided seal on the back panel, while the invisible side is bare. After the single-sided sealing, the back sheet is easy to be wet and moldy, and it is easy to release formaldehyde and cause pollution, so it must be double-sided sealed.
4, to ask how to assemble
For general small factories or manual on-site production, only screw rivets or glue can be connected. Generally, the third-generation box-and-rod structure with fixtures and quick-release parts adopted in the cabinet is required, which is more effective in ensuring the firmness and bearing capacity of the box body, and less use of glue, which is more environmentally friendly.
5, ask whether the anti-mite mute edge
We want to use the anti-mite silent edge-sealing cabinet. When the door is closed, the impact force can be alleviated, the noise is eliminated, and the insects and other insects are prevented from entering. The cost of preventing the edge sealing is 3%. We also need to check whether the countertop, the door panel, the box and the sealing strip, and the anti-collision strip are processed by the machine, and whether it is pressed on both sides. Lack of sealing of the seal will cause fumes, dust, and insects to enter.
6, to ask about the composition of artificial stone
For the materials suitable for the kitchen countertops, there are fireproof panels, artificial stone, natural marble, granite, stainless steel, etc., among which the performance price ratio of artificial stone countertops is good. The cheaper tabletop calcium carbonate is high in composition and easy to crack. More used in the current market is composite acrylic, pure acrylic and so on. The composite acrylic acrylic component is generally about 20% in a good ratio.
7, to ask about the installation method of the aluminum foil in the sink cabinet
We have to ask if the installation method is to suppress it once or paste it with glue. If the sealing performance of one press is more perfect, water and moisture are not easy to penetrate, and the cabinet body can be more effectively protected, and the service life of the cabinet can be extended.
8, to ask whether the artificial stone is dust-free (less dust) installation
In the past, many manufacturers will carry out artificial stone grinding at the installation site, causing environmental pollution in the living room, which is unexpected for consumers. Now some leading cabinet makers are aware of this. If the cabinet manufacturer you choose is dusty, we must choose to install the countertop before the floor and paint enter the site, otherwise we will have to spend money to do the second cleaning.
9. Ask if you can provide a test report.
We know that cabinets are also furniture products, and the state has expressly stated that it is necessary to issue a finished product inspection report and express the formaldehyde content. Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials is not equal to the environmental protection of finished products. Only the qualified products can prove that their products are qualified. Therefore, the consumer can ask the merchant when purchasing, we can also record the quality inspection report number shown by the merchant and call the quality inspection department to check the authenticity.
10, ask the warranty period
We should not only care about the price and style of the products, but also see if the after-sales service can provide the performance of the manufacturers. For example, the warranty period, some manufacturers are one year, some manufacturers are two years, and some are five years. For those manufacturers who dare to protect for five years, they will definitely demand higher requirements in terms of materials and manufacturing, which is also affordable for consumers.
Jc001.load('news_ads'); jc001.newsAds.prints("5")
Purlin Roll Forming Machine,Cz Purlin Roll Forming Machine,Z Purlin Roll Forming Machine,C Purlin Roll Forming Machine
Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.frollforming.de