| Home>Bearing knowledge>The suffixes of the bearings of different brands are different. |
The suffixes of the bearings of different brands are different.
Source: China Bearing Network Time: 2017-10-27
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
SKF bearing pre-code (prefix) and its meaning
GS thrust cylindrical roller; thrust needle roller bearing race. Example: GS81107 - thrust cylindrical roller bearing 81107 seat.
K thrust roller and the holder of the bracket. Example: K81170.
K- Fit AFBMA specification series Inch tapered roller bearings with inner ring (inner cone) or outer ring (cone ring) with roller and holder assembly. Example: K-09067 series is the inner cone of 09000 tapered roller bearing body.
L Single bearing inner ring or outer ring. Example: LNU207 cylindrical roller bearing NU207 inner ring.
SKF bearing rear code (suffix) and its meaning single row angular touch ball bearing
The ACD touch angle is 25 degrees.
B The touch angle is 40 degrees.
The CC touch angle is 12 degrees.
Spherical roller bearing
CAC; ECAC; CA; ECA These are used for large-scale bearings; the rollers are symmetrical. The inner ring has fixed ribs on both sides; the active retaining ring is guided by the inner ring. The support frame is all brass or steel solid frame. CAC and ECAC bearing rollers and raceways are optimized for machining; they help roller guidance; and reduce conflicts. ECAC models with reinforced rollers;
-2F Spherical ball bearings with dust ring on both sides.
-2FF outer spherical ball bearing with combined dust ring on both sides.
G Universal pairing single row angular contact ball bearings. When placed face to face or back to back; there is a certain preload of the device in the bearing.
GA face to face; when placed back to back; there is a lighter preload in the bearing.
GB face to face; when placed back to back; medium preload in the bearing.
GC face to face; when placed back to back; heavy preload in the bearing.
K tapered hole; taper 1:12.
K30 tapered hole; taper 1:30.
FAG bearing pre-code (prefix) and its meaning
R is placed directly before the bearing code; other pre-codes are separated from the root code by small dots.
GS thrust cylindrical roller bearing race. Example: GS. 81112
KC-Combination of the roll and the holder. Example: The combination of the thrust cylindrical roller and the holder. 81108.
FAG bearing rear code (suffix) and its significance
F-steel body adheres to the frame; roll body guide.
The FA-steel entity adheres to the frame; the outer ring guides.
FAS-steel body adheres to the frame; outer ring guides with lubrication grooves.
FB-steel body adheres to the frame; inner ring guides.
FBS-steel body adheres to the frame; inner ring guides with lubrication grooves.
FH-steel solids adhere to the frame; carburized and quenched.
H, H1-carburized and quenched to stand.
The P5-public service level meets the 5th level of the international standard ISO rules.
P4 - The level of public service is in line with the international standard ISO level 4.
P2-Public service level meets international standard ISO level 2 (excluding tapered roller bearings)
NSK bearing front code meaning
F Deep groove ball bearings with flanged outer ring (for d less than 10 mm); Example: F605.
HR high load tapered roller bearings; example: HR30207J.
NSK bearing post code meaning
A internally depicts a bearing that is different from the specification.
A corner touch ball bearing; touch angle is 30 degrees.
A5 angular touch ball bearing; touch angle is 25 degrees
Z; ZS with a steel dust cover on one side.
ZZ; ZZS with steel plate dust cover on both sides.
D; DU with a touch rubber seal on one side.
C1 radial bearing radial clearance; smaller than C2 clearance.
C2 radial bearing radial clearance; smaller than the gauge clearance.
CN (saving) & mdash, bearing; radial bearing radial gauge clearance.
C3 radial bearing radial clearance; larger than the specification clearance.
C4 radial bearing radial clearance; larger than C3 clearance.
NTN bearing suffix meaning
B 40° touch angle, A 25° touch angle, C 15° touch angle, J pressed steel holder, LI machined copper alloy holder, DB back-to-back equipment, DF face-to-face equipment, CS radial clearance is larger than the specification clearance .
TIMKEN bearing suffix meaning
AB outer ring with flanged outer ring, not interchangeable with the basic type
The inner ring of the AC has a different inner diameter and the outer diameter of the rounded corner. The outer outer ring has a different outer diameter/width/or fillet radius than the fundamental type.
AD outer ring double outer ring, not interchangeable with the basic type
CR inner/outer ring outer raceway with rib bearing series
CX inner circle scale is not the same as the root type, no exchange
D inner/outer ring double inner ring or double outer ring, not interchangeable with the basic type
INA bearing suffix meaning
P- bearing with sealing ring on one side
PP- bearing with sealing ring on both sides
RS- bearing with seal on one side
2RS- bearing with sealing ring on both sides
P6-scale public service and a few bearings with high precision requirements
P5-scale public service and a few bearings with high precision requirements
P4-scale public service and a few bearings with extremely high precision requirements
KOYO bearing front code name
4CRI- four row cylindrical roller bearing inner ring; example: 4CRI4560F
4CRO- four-row cylindrical roller bearing outer ring; example: 4CRO660AF
E- magnetic motor ball bearing; outer diameter is positive public service; example: E10
EN- Magnetic motor ball bearing; outer diameter is negative public service; Example: EN10
KOYO bearing suffix meaning
A-angle touch bearing; touch angle 30 degrees (not marked); example: 7210
B-angle touch bearing; touch angle 40 degrees; example: 7210B
C-angle touch bearing; touch angle 15 degrees; example: 7210C
RSC- silicone rubber RS ​​seal; Example: 6210RSC
RSD- polypropylene rubber RS ​​seal; Example: 6210RSD
RSE- single-sided; rib-guided touch-type synthetic rubber seal; example: 6206RSE
K- with tapered bearing; taper 1:12; example: 1210K
K30- with tapered bearing; taper 1:30; example: 23026K30
N-outer ring with snap groove bearing; Example: 6206N
C- Tapered roller bearing with keyhole
NR- outer ring with snap ring bearing; example: 6210NR
Y- is a non-canonical chamfer smaller than the standard chamfering scale; Example: 30206Y
S- tapered roller bearing; non-standard chamfering (inclination)
SG- Tapered Roller Bearing with Spiral Groove
Recommend to friends comments close window
| Bearing related knowledge |
| LYC wind power bearing quenching and tempering heat treatment process; a serious breakthrough The performance of KOYO outer spherical bearing damage is a large summary of the "damage explanation" of diesel engine bearings in operation. IKO bearing smooth protection method SKF imported bearings agricultural machinery bearings |
This article links to http://
Please indicate the bearing network http://
Previous:How to do bearing shelling failure? The next section: Y-bearing unit unit
Uhp Graphite Electrode,Graphite Electrode For Steelmaking,Electrodes For Sales Uhp,300Mm Graphite Electrode Uhp
Carbographite Industrial PTE.LTD , https://www.graphites.pl